X-RAYS

X-rays were discovered by a German scientist named Roentgen in 1985. They can pass through most substances including soft tissues of the body but not through bones and most metals. They were named X-rays meaning ‘unknown rays’.

 

X-ray production

They are produced by modified discharge tubes called X-ray tubes. The cathode is in the form of a filament which emits electrons on heating. The anode is made of solid copper molybdenum and is called the target. A high potential difference between the anode and the cathode is maintained (10,000 v to 1,000,000 or more) by an external source. The filament is made up of tungsten and coiled to provide high resistance to the current.

 

The electrons produced are changed into x-rays on hitting the anode and getting stopped. Only 0.2% of the energy is converted into x-rays. Cooling oil is led in and out of the hollow of the anode to maintain low temperature. The lead shield absorbs stray x-rays.

 

Energy changes in an X-ray tube

When the cathode is heated electrons are emitted by thermionic emission. They acquire electrical energy which can be expressed as E = e V. Once in motion the electrical energy is converted to kinetic energy, that is eV = ½ me v2.

The energy of an electromagnetic wave can be calculated using the following equation Energy = h f,where h- Planck’s constant, f – frequency of the wave. The highest frequency of the X-rays released after an electron hits the target is when the greatest kinetic energy is lost, that is h f max = eV. Lower frequencies are released when the electrons make multiple collisions losing energy in stages, the minimum wavelength, λ min, of the emitted X-rays is given by;

(hc) / λ min = eV. These expressions can be used to calculate the energy, frequencies and wavelengths of X-rays.

 

Properties of X-rays

  1. i) They travel in straight lines
  2. ii) They undergo reflection and diffraction

iii) They are not affected by electric or magnetic fields since they are not charged particles.

  1. iv) They ionize gases causing them to conduct electricity
  2. v) They affect photographic films
  3. vi) They are highly penetrating, able to pass easily through thin sheets of paper, metal foils and body tissues

vii) They cause fluorescence in certain substances for example barium platinocynide.

 

Hard X-rays

These are x-rays on the lower end of their range (10-11 – 10-8 m) and have more penetrating power than normal x-rays. They are capable of penetrating flesh but are absorbed by bones.

 

Soft X-rays

They are on the upper end of the range and are less penetrative. They can only penetrate soft flesh and can be used toshow malignant growth in tissues.

 

Dangers of X-rays and the precautions.

  1. They can destroy or damage living cells when over exposed.
  2. Excessive exposure of living cells can lead to genetic mutation.
  3. As a precautionary measure X-ray tubes are shielded by lead shields.

 

Uses of X-rays

  1. Medicine– X-ray photos called radiographs are used as diagnostic tools for various diseases. They are also used to treat cancer in radiotherapy.
  2. Industry– they are used to photograph and reveal hidden flaws i.e. cracks in metal casting and welded joints.
  3. Science– since the spacing of atomic arrangement causes diffraction of x-rays then their structure can be studied through a process called X-ray crystallography.
  4. Security– used in military and airport installations to detect dangerous metallic objects i.e. guns, explosives, grenades etc.

 

See also:

CATHODE RAYS

MAINS ELECTRICITY

ELECTROMAGNETIC INDUCTION

ELECTROMAGNETIC SPECTRUM

FLOATING AND SINKING

Leave a Comment

Your email address will not be published. Required fields are marked *

Get Fully Funded Scholarships

Free Visa, Free Scholarship Abroad

           Click Here to Apply

Acadlly