Types of Machine Archives | School Portal NG

Definition of Simple Machine A machine is a tool or device that makes work easier. It is defined as a tool which uses force applied (effort) at one point to overcome another resisting force (effort) at another point. Examples of machine include: a plier, the human arm, a gear, a pulley etc. Types of Machine There are six types of simple machines. They are; Lever Wheel and axle Pulley Wedge Inclined plane Screw Lever A lever is a simple machine built on the principle of a stiff bar resting on a pivot or fulcrum with a load placed at one end and effort applied on the other end. There are three parts of the lever; Load: This is the point of the resisting force. Effort: This is the point where force is applied. Fulcrum: This is the turning point of the lever. Types of Lever There are three classes or order of lever. They are; First Order Lever: In this lever, the fulcrum is between the load and effort (LFE). Examples include: scissors, claw hammer. Second Order Lever: In this lever, the load (L) is between the effort (E) and the fulcrum (F) (FLE). Example of this including; wheelbarrow, nutcracker, bottle opener etc. Third Order Lever: In this lever, the effort is between load and effort. (FEL). Example of this include; fore arm. Wheel and Axle This simple machine is used to lift heavy load from depth. It consists of a Large wheel on a small axle that turns in the same axis. Examples of wheel and axle include: bicycles, fan, wagon etc. Use It is used to draw out heavy load from depths It is used to create the turning effects in bicycle Pulley A machine consisting of a wheel over which a pulled rope or chain runs to change the direction of the pull used for lifting a load. Combinations of two or more pulleys working together reduce the force needed to lift a load. Uses It is used lift and move load in cranes It is also used in lifts (elevators) Wedge A wedge is a triangular shaped tool, and is a portable inclined plane. It can be used to separate two objects or portions of an object, lift up an object, or hold an object in place. Use It is used to split objects open especially wood. Screw A screw is a type of fastener characterized by a helical ridge known as thread. Most screw rotate in clockwise manner but few rotate in anticlockwise manner. Use It allows drilling into hard surfaces Inclined plane An inclined plane is a flat supporting surface tilted at an angle, with one end higher than the other, used as an aid for raising or lowering a load. The inclined plane is often used to lift a load over a vertical obstacle. Importance of Simple Machine Simple helps man to overcome friction in doing work. It helps to move load over a long distance. It helps to save time and effort It is more efficient. Simple machines are basic and simple to operate. See also ELECTRONICS RADIOACTIVITY PHOTOELECTRIC EFFECT ELECTROMAGNETIC INDUCTION ELECTROMAGNETIC SPECTRUM

SIMPLE MACHINE