NETWORKING | LAN, MAN, WAN, SERVER, TOPOLOGY - 2024

A computer network is a system that connects two or more computers together using a communication link. It describes a processing system with a number of independent, relatively low-speed, online, simultaneously usable workstations. In a network, remotely located computer stations are connected to a centrally located sophisticated, high-speed processor via a communication link (telephone lines, microwave links, satellite) for the purpose of sharing resources like printers, processors, programs and some other information.

Table of Contents

Work station/ Client: Each computer in a network is often referred to a work station or clients. Clients are the computers that can access the shared network resources provided by a server.

Server: A server provides shared resources and data over a network. It is usually a high performance micro-computer with several drives often given several gigabytes of capacity and perhaps a few CD-ROM drivers, server allow all the microcomputer to have access to an external network via the network communication system.

Media: The computers are linked to each other by hardware components such as cables (UTP, STP, coaxial and fiber optics)

Get A Free USA Scholarship, Visa & Accommodation

User: This is any person that uses a client to access resources on the network.

Resources: These are files, printers, modem or other items that can be used by network users. These

can be hardware or software resources.

Protocol: They are written rules used for communication. They are language that computers used to talk to each other over a network eg. TCP/IP, AppleTalk

Categories of Computer Networks

Computer networks are categorized according to how they are organized, the way in which they are used, and the limit of distance covered in the area of operation. These include:

Local Area Network (LAN).
Wide Area Network ( WAN)
Metropolitan Area Network (MAN)

LOCAL AREA NETWORK

This is a popular form of network which refers to the connection of computers within a limited geographical area or within the same building or different building on the same site. Several LANs can be connected by the use of bridges and routers.

WIDE AREA NETWORK

This is a network between large geographical area. It is a global connection of computers. They are more sophisticated and use superior transmissions channel like microwave and satellite transmission to reach users over very long distance. One of the most widely used of WANs is the Internet, which allows users to connect to other user worldwide.

METROPOLITAN AREA NETWORK

This is a network used to link users within metropolis or city.

Study in US, Canada, UK, Germany For Free

Network Topology

Topology is the term used to describe the physical arrangement of computer in networks. A computer network can be arranged or configured in several different ways:

Types of network Topology

(i)Star Topology (ii) Bus Topology (iii) Ring Topology (iv) Hierarchical Topology

Star Network:

In a star network, a number of small computers are connected to the central resources usually called a host computer or file server. The star is a common arrangement for linking several microcomputers to a mainframe and providing a tine sharing system. This arrangement provides high security because every communication between work stations must be via the central node computer (servers)

Advantages of star Topology

It is most reliable because if a node or a node cable fails it does not affect the other nodes.
New nodes or devices can easily be connected without affecting rest of the network.
Performance of the network is dependent on the capacity of the central hub, adding further nodes do not greatly affect the overall performance.
Existence of centralized management helps in monitoring the network.
Ease of installation and upgrading from a hub to a switch.
Simple and cheap.

Disadvantages of Star Topology

If the server or the link to the server fails, the whole network is bound to fail.
The additional devices such as hubs or switch increase the overall cost.
The addition of more nodes depends on the capacity of the central device.
Reconfiguration, fault isolation and installation of new devices tend to be difficult.

Bus Topology:

It has a common cable to which all the computers on the network are linked. The common cable usually terminated at each end. One or more of the station on the network acts as the file server. An example of the bus system is the ETHERNET.

Advantages of Bus Network

Installation is very simple and cheap.
It is suitable for temporary network.
The failure of one node does not affect the rest of the bus network.
Flexibility of nodes is visible as they can be attached or detached without any problem.
Troubleshoot is easier compared with ring topology.

Ring Network:

It uses one network cable to connect all the workstation in an arrangement that looks like a ring. Ring networks are less secure because data intended for a particular machine may have to pass by other machines before it gets to its destination in the network.

Advantages of Ring Network

This is an orderly network, where everydevice has access to token and the privilege to transmit and this helps to reduce chances of collisions.
Equal access to resource by each computer or node.
The performance of the network is not affected by additional components
Installation and reconfigure is made easy since addition or deletion of a device requires moving just two components.
No need of central server to manage the connectivity between the computers or nodes.

Disadvantages of Ring Network

The hardest of all topology to troubleshoot because it can be hard to track down where in the ring, the failure has occurred.
Addition, changing and moving the nodes can affect the network.
For the node to communicate with one another there is need for all the nodes to be switched on.
The entire network is affected if one workstation or port goes down.
The whole network will fail if any one of the cable fails anywhere in the ring.

4. Hierarchical Network:

This is a specialized kind of bus topology, the terminals are connected in the same fashion as the branches of a tree. It is very easy to extend and if one of the branch fails, it can easily be removed.