BECE BASIC TECHNOLOGY PAST QUESTIONS

BECE BASIC TECHNOLOGY PAST QUESTIONS

0%
1257

BECE/JSCE (BASIC TECHNOLOGY)

Acadlly.com 512 x 512

BECE BASIC TECHNOLOGY PAST QUESTIONS

Attempt all 60 questions selected from our question bank. You have 1 hour to answer all the selected questions.

Goodluck

1 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The care of radio include the following EXCEPT ____________

2 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

All the following are storage devices EXCEPT ___________

3 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Cooling is produced in refrigerator by the principle of __________

4 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Chain drives are used in the following machines EXCEPT __________

5 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

A device used to connect or discount two revolving shafts in a transmission system is known as __________

6 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Gear drives are used to transmit ___________

7 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is not a purpose of lubricant

8 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following shapes has an angle more than 180 degree?

9 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

An example of wood that do not shed their leaves is __________

10 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is used as a measuring tool?

11 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following are used for producing air EXCEPT __________

12 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The difference between thermoplastic and thermoset is

13 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

For safety purpose a good workshop should have the following EXCEPT ___________

14 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The petrol used in car engine is a type of __________

15 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is NOT a mechanical fastness?

16 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Cotton wool is used for the following EXCEPT for ____________

17 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Mechanical engineering is involves in the following EXCEPT ________

18 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following countries make use of their natural resources EXCEPT ______________

19 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The cutting tools fitted into the hole of the anvil is called

20 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The preliminary work done to keep the site ready for the construction of a building is called __________

21 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The force that slows down a moving body in air is known as _______

22 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of these is NOT a woodwork measuring tool?

23 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Grubbing out of tree roots from the ground are camed out mechanical by __________

24 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is used for cutting complex shapes and curves in woodwork?

25 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following materials is NOT used for electricity transmission?

26 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following are wood work machine EXCEPT __________

27 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

All the following are required in building EXCEPT _________

28 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

File without a handle should not be used in the workshop so as to _________

29 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The process of liberating an electron by the use of heat is called ___________

30 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

A photographic print of a plan for a building drawn with white lines and on blue background is called ___________

31 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The angle of inclination  in isometric drawing is ____________

32 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The following are professions for studying basic technology EXCEPT _____________

33 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

In electric circuit, the flow of current is controlled by ________

34 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The energy generated when petrol is burnt inside the cylinder of a petrol engine is ___________

35 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following devices is used to convert sound energy into electrical energy?

36 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Mechanized process involves ____________

37 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

An amplifier is a device used to ___________ signal

38 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

A professional job from which we earn living in life is called ________

39 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Thin continuous lines are used for the following EXCEPT __________

40 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is used in the transmission of motion in a bicycle?

41 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of these foods CANNOT be stored in refrigerator?

42 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The device used to convert analogue signals to digital signals is known as

43 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Pincers are used for _________

44 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

High tension cable lines are usually made of __________

45 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Complete circuit must have all the following EXCEPT _____________

46 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Plastics materials are used for making handle of cooking pots because they are ________

47 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following goggle is used when carrying out arc welding?

48 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The amount of space within the boundary of a plane figure is known as ___________

49 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Boring and Tenoning of wood can be carried out on ________

50 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is NOT used is freehand sketching?

51 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The function of foundation in a building is to

52 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

A capacitor is a device used to __________

53 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following is NOT a product of rubber?

54 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which of the following causes wears and tears of machine parts?

55 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Which type of machine is used for producing cylindrical and tapered surface in metal work?

56 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Plastics are used in electrical connection as __________

57 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

In a gear box if the driver gear has 120 teeth and revolves at 60 rev/min, what is the speed of the driven gear with 80 teeth?

58 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Tools used for digging and loosening the soft soil is called __________

59 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

Hacksaw is a tool used for cutting _________

60 / 60

Category: BECE BASIC TECHNOLOGY PAST QUESTIONS

The workshop equipment on which all metals to be beaten are placed is ___________

Your score is

0%

DRAWING INSTRUMENTS AND MATERIALS

BUILDING

BECE ENGLISH LANGUAGE

CONCEPT TECHNOLOGY

 

7 thoughts on “BECE BASIC TECHNOLOGY PAST QUESTIONS”

    1. Thank you for your request. Your request is been added and answered on the Past Question Bank Pro. If you have interest, this is the link to the answers to all the questions and more subjects and questions that are not on the free section are here on the Past Question Bank Pro Past Question Bank Pro

Leave a Comment

Your email address will not be published. Required fields are marked *

Get Fully Funded Scholarships

Free Visa, Free Scholarship Abroad

           Click Here to Apply

Acadlly